Rest in Peace, Pushing Daisies

At the precise moment I started writing this, the story of the piemaker was 1 year, 8 months, 12 days, 11 hours, and 52 minutes old. Sadly, the final episode of Pushing Daisies ended 2 days, 9 hours, and 11 minutes ago. That such an amazing show was granted only such a short life is rather ironic, given that the central figure, the aforementioned piemaker, had the unique ability to bring the dead back to life with a touch.

The facts were these: Pushing Daisies premiered (in the United States) on October 3rd, 2007, as one of the most anticipated new television shows of the 2007-2008 season. Initial ratings were good, and the show seemed to be one of those rare shows to actually live up to its own hype. Pushing Daisies was granted an early renewal when the Writers' Strike of that year cut its first season down to a mere 9 episodes. The show then remained absent from our screens for most of the next year, until the second season finally began on October 1, 2008. Sadly, the long absence from public awareness proved too much for the tale of the piemaker, and ratings never approached their first season levels. Pushing Daisies was quietly pulled from the network schedule, disappearing around Christmastime with three episodes filmed, but never aired. Those three episodes were just as quietly shown in a Saturday-at-10:00 pm time-slot (dare I say, a "graveyard slot"?) over the past few weeks.

I don't really understand the whims of network decision-making, but I truly feel that ABC mishandled this show in light of the strike. The strike forced the show to go off-air prematurely. The network couldn't do anything about that. What they could do was publicity. Although there was indeed an advertising campaign for Pushing Daisies as it approached the beginning of its second season, I think the show would have done FAR better if that campaign was accompanied by broadcasting the season one episodes a second time in the couple of months immediately preceding the beginning of the second season, in order to re-introduce viewers to the storyline. Unfortunately, broadcast networks seem to be especially allergic to doing reruns in these days of internet accessibility, except for their very-highest-rated shows. One can certainly blame the 2007 Writers' Strike for doing the damage, but it was this resistance to airing reruns that, in my opinion, put the nail in the coffin.

Appropriately enough for a show about a person who could raise the dead, there remains the possibility of life after death for Pushing Daisies. Creator Bryan Fuller has worked out a deal with DC Comics to do a 12-issue Pushing Daisies comic book. I've found no word at this point as to when such a series would be available, and given the unpredictability of the comic book industry, it still might not happen at all. But I appreciate the effort made into making sure that the story of Pushing Daisies may not yet be entirely dead.

BotCon 2009 Exclusive Feature: Elita-1

The second figure in the "BotCon Anniversary Pack" (and the last of the thirteen figures released for BotCon 2009) is Elita-1. Elita-1 featured pretty heavily in the BotCon 2007 comic, "Games of Deception." In fact, she was given considerably more to do than several of the characters that were actually given toys at BotCon 2007, which annoyed more than a few fans. But I'll get to more of that in a moment.

Elita-1 is an homage to a Generation One character that wasn't actually given a transforming toy back in the original Generation One era, but who was introduced in the cartoon episode, "The Search for Alpha Trion," which introduced the concept of "female Autobots" to the Transformers franchise. BotCon Elita-1 is a straight repaint of Cybertron Thunderblast. Thunderblast actually wasn't all that popular a toy back in the Cybertron line (a classic example of the "shellformer" transformation, which tends to result in disappointing toys), but is one of few Transformers toys explicitly created to be a "female" character.

This gets to another reason why Elita-1's inclusion in the BotCon 2007 story (again, even more prominently than characters that got toys at the time) is so controversial. "Games of Deception" was set in what has been called the "Classicverse," a continuity created by Fun Publications to feature the "Classics" line of toys in 2006. The "Classicverse" was not a continuation of the cartoon continuity, but rather of the original Marvel comics continuity as it appeared in the US (i.e., the UK-exclusive material that was created to mesh with the US stuff wasn't included), but only up to the end of the Generation One series (i.e., the material from the US Generation Two comic wasn't included either). The Marvel comics continuity is one of (surprisingly) very few continuities where it was explicitly stated that Transformers had no gender: "No men, no women... no mates!" (They are robots, and not biological organisms, after all.) Why go to the trouble of introducing a cartoon character (especially this cartoon character) into this continuity when this continuity explicitly says "female" Transformers don't exist (especially when you end up sidelining characters that were actually given toys at that convention in order to do so!)?

OK. Rant over. What's done is done, and despite Elita-1's ill-suitedness to the "Classicverse," fans have been asking for a proper transforming toy of the character for years (and, no, the movie-continuity repaint of Energon Arcee doesn't count), so a lot of folks were pretty excited to get this toy (and disappointed when it didn't happen in the year following BotCon 2007). Indeed, a lot of Transformers club members who've been asking for this figure and for Razorclaw for years now were furious when they learned that these figures would be BotCon 2009 exclusives. Hopefully the fact that enough were left after the convention to sell them in the club store has placated their anger.

BotCon 2009 Exclusive Feature: Razorclaw

The third set of "BotCon souvenirs" has nothing to do with the "Wings of Honor" story whatsoever. It's called the "BotCon Anniversary Pack," in honor of the 25th Anniversary of the Transformers franchise and the 15th Anniversary of BotCon, which also happened to be the 5th BotCon put together by Fun Publications. Both of the figures in the set were featured in previous BotCon stories, although no figures were made of these characters at the time. Even back then, it was clear enough that the characters were patterned off of existing molds such that exclusive toys could be made, and there have been a significant number of fans asking for these figures. Razorclaw was featured in a cameo at the end of the BotCon 2006 story, "Dawn of Future's Past."

BotCon Razorclaw is a redeco of Cybertron Leobreaker, transforming into a mechanical lion, an homage to the original Razorclaw, one of the Generation One Predacons from 1986. BotCon Razorclaw's Tech Specs suggest that, as the Decepticons were facing defeat at the end of the war against the Autobots, Razorclaw forged a new team of Predacons to continue the fight. These new Predacons are intended to be the faction that was featured in the Beast Wars line. Razorclaw disappeared at about that time (apparently believed to be assassinated), only to re-emerge some time after the Beast Machines series (at the end of the "Dawn of Future's Past" story) vowing that the Maximals would "again tremble before (his) might." What happens next has never been told, and it's rather uncertain that this story ever will be finished, but at least fans finally have the toy they've been asking to get for about three years now, complete with the "post-Beast Machines" Predacon symbol created specifically for Razorclaw in that cameo.

Razorclaw has been given a remolded head, which completes the homage (unfortunately, mine's missing a couple of paint applications on one side of the head!). A few months before the convention, Hasbro released another repaint of Leobreaker with a remolded head, Leo Prime, causing fans to wonder (when rumors of a Razorclaw exclusive began to surface) whether Fun Publications would use the Leo Prime head (which has a number of general similarities to the original Razorclaw head, but which is clearly a "Prime" design), or "waste" the effort to create a "similar" head, as BotCon 2008 Blurr and the BotCon 2006 Arcee repaints Chromia and Flareup are often accused of having. Pete Sinclair made a comment online indicating that he didn't like the Leo Prime head for Razorclaw, but it wasn't revealed until the convention itself that Fun Publications actually didn't know Hasbro's intentions for Leo Prime at the point when plans for Razorclaw were being made. If they had, there would undoubtedly have been a lot pressure to use the Leo Prime head instead of one created specifically for Razorclaw, and Pete indicated being glad that they didn't have to make that decision, preferring the head created for Razorclaw quite a bit.

Razorclaw comes with a Cybertron-style "key," but this one is painted up with a "Golden Disk" pattern in a similar fashion to other figures in the BotCon 2006 set, and is therefore called a "Golden Disk" key. Plugging this key into Razorclaw's arms will activate spring-release claws.

Although the "BotCon Anniversary Pack" was a convention exclusive, Fun Publications made 2000 sets, and these did not all sell out before the end of the convention. Remaining sets can still be ordered from the Transformers Club Online Store for the same price as they were sold for at the convention itself (minus California's 9.25% sales tax, but plus shipping).

EXTRA: Members of the Fun Publications staff went to see a taping of The Price is Right when they were out here for the convention, and one them got called up on stage! The episode aired today, and you can catch it at CBS.com tonight, and for the next couple of weeks.

BotCon 2009 Exclusive Feature: Skyquake

Skyquake is the second figure in the "Wings of Honor Villains" set. Like Thunderclash, Skyquake is an homage to a figure exclusive to the United Kingdom and Europe in 1992. Skyquake is the leader of the Decepticon group that attacks Kup and his "Elite Guard" colleagues in the "Wings of Honor" comic.

Skyquake is an appropriate counterpart to Thunderclash in a number of ways. Not only were they both leaders in their original incarnations (a role which each has retained in the "Wings of Honor" story), and not only do both have rather loud color schemes, but both Skyquake's and Thunderclash's original toys were used to create Machine Wars figures. The original Skyquake's mold was used was used to create Machine Wars Starscream in 1997. It is perhaps therefore fitting that Skyquake was created from a Starscream mold (the Energon version, the same mold used by Leozack) this time around.

Since Skyquake does use the exact same mold as Leozack, Skyquake has all the same weapons and features, and there's not a lot of point in going over them again. It's become expected for Fun Publications to re-use at least one mold within the exclusives made for a given BotCon. 2005 saw Buzzclaw, Dirge, and the Virulent Clones. 2006 gave us Cheetor and Tigatron. 2007 had three Decepticon jets from the same basic mold (although each had a slight mold variation from each other). And last year's convention offered Jazz and Ricochet. Reusing molds in this way helps keep down costs, so that the convention can offer more exclusive toys without having to charge so much more than they already do. Granted, we've already gotten Scourge and the Sweeps this year, so perhaps yet another mold reuse was unnecessary, but I'm not really complaining.

BotCon 2009 Exclusive Feature: Banzai-Tron

In addition to the box set and "attendee freebie," there are always a couple of "souvenir" sets of exclusive figures you can buy at BotCon, but which are not officially announced until the convention actually begins. At BotCon 2009, there were actually three sets. I mentioned one already--the Sweeps--when I featured Scourge. Banzai-Tron was one of the two figures in one of the other two sets. The set with Banzai-Tron was referred to at the convention as the "Wings of Honor Villains" set, since both figures in this set were Decepticons that featured in the BotCon 2009 comic story. We'll get to the other set in a couple of days.

Like most of the exclusive toys from BotCon 2009, Banzai-Tron is an homage to an existing character. In this case, the original Banzai-Tron was a 1990 Action Master. One of the "new" characters created for the Action Master line, Banzai-Tron not only didn't transform, but there weren't any signs of a definitive alternate mode on Banzai-Tron's Action Master figure, so while one could assume that Jackpot (for example) turned into some kind of van before becoming an Action Master, it was difficult to speculate with Banzai-Tron. Now, the mystery may be solved. Banzai-Tron turns into a boat! But is this what Banzai-Tron looked like immediately before becoming an Action Master? Who's to say?

Of course, BotCon Banzai-Tron is a repaint of a previously existing figure: Energon Mirage. Although no remolding was done to Mirage to create Banzai-Tron, it's a surprisingly good match. The head shares enough of Banzai-Tron's distinctive characteristics to clearly be the former (or is that future?) Action Master character with nothing more than a few paint applications.

Decepticons in the Energon line tended to feature pop-out weaponry, and so Banzai-Tron inherits this feature. Here you see Banzai-Tron's vehicle mode with the front missile launchers deployed. Another feature of the vehicle mode worth drawing attention to is the Cybertronian lettering on the side. This says "To the victor go the profits," which happens to be Action Master Banzai-Tron's Tech Specs quote. Unlike Legends Cosmos, where we just have to accept it on faith that the lettering on the toy actually spells Cosmos' name, the lettering on BotCon Banzai-Tron actually conforms to the Cybertronian alphabet created for AllSpark Wars, an online site (although it conforms to the "Autobot" variation rather than the "Decepticon" one). Gotta love that attention to detail!

Banzai-Tron's pop-out weaponry can be deployed in robot mode, too, although it makes the figure even more unwieldy than it already is to start with. In fact, that's my only real gripe with this toy. He's got a HUGE amount of vehicle kibble hanging on his back and his arms that makes playing with the toy awkward, at best. Still, the mere fact that an Action Master character who'd never had a vehicle mode before finally has one (although this isn't the first time this has happened) is a huge plus, and this toy is really worth picking up on the merits of that reason alone.

BotCon 2009 Exclusive Feature: Leozack

As an incentive to get people to actually come to BotCon, rather than just fork over the money for a non-attendee set or make arrangements to buy the figures on eBay, Fun Publications always includes one figure that is "free" with the main box set, but which is only given to people who actually attend the convention. This year, Leozack was that "attendee freebie." Leozack is an homage to a Japanese-only toy from 1989. 1989 Leozack was a member of the "Breastforce," which meant nothing more prurient than the fact that he had a breastplate that could transform into an animal (a lion, as perhaps indicated by Leozack's name) and then into a weapon. Kind of the "next evolution of Targetmaster," if you will.

BotCon Leozack avoids any of the potential of lascivious misunderstandings that have naturally arisen over the years via the concept of Transformers with removable breastplates (stop that! I mean it!) by making this toy a straight-up repaint of Energon Starscream.

That's not to say that Leozack doesn't have extra weapons. It's just that he comes with the same ones that came with Energon Starscream. Here, for example, we see how Leozack's wings can fold down to reveal missile launchers. Of course, by removing the very things that would keep Leozack in the air, I'm assuming that the designers intend this to be some kind of odd tank mode, or some such.

Recognizing Leozack's Japanese origins, the writers of this year's BotCon comic gave Leozack one of the most over-the-top personalities seen in a Transformer in recent years, as he displays a combination of Japanese anime stereotypes. For example, his Tech Spec bio card says that, due to the nature of his "experimental combat upgrades," Leozack actually has to shout out the nature of his weapons attacks before they can be activated.

Given the personality Leozack has been given, the ridiculously long sword he has (if you combine the two energon weapons that come with him, and really, they make more sense combined than not) makes perhaps even more sense on Leozack than it originally did with Energon Starscream. Here's a picture of Leozack with those energon weapons separated and his missile launchers deployed in robot mode, perhaps ready to employ his "Great Power Rocket Swarm Attack."

I've always argued that I often care more about the characterization behind the robots than the toys themselves, and by that standard, Leozack is a lot of fun. I hope the folks at Fun Publications can find more ways to use this character in the future.

BotCon 2009 Exclusive Feature: Scourge

Of the five figures in the "Wings of Honor" box set, Scourge is the lone Decepticon. Yet, he doesn't interact with any of the other characters represented by the other toys at all (at least, not at the ages they were at when they looked like the toy we're being given) in the comic that comes with the set. Instead, Scourge is featured in a "framing story" that gives old-guy Kup a reason to remember his time as a young 'un. I find this to be more than a little strange.

Don't get me wrong, I'm actually a fan of the toy, which is a repaint of Cybertron Sideways. Although I know that not everyone agrees with me on this point, I actually think that the vehicle mode captures the essence of Scourge quite nicely. Granted, it's not a "flying soapdish" (as some have described the original Scourge's alternate mode), but if one accepts the idea that Scourge is somewhat of a vampire (he was created from the remains of dead Decepticons, after all. I confess that I'm not the first one to come across the "vampire" analogy), and one then remembers that this toy was also used for the recent Ratbat release, it all comes together.

All BotCon exclusives are repaints, and with the recent line of movie-related toys off-limits due to licensing issues, and the Animated line simply too recent to be viable for the long planning BotCon requires, and nearly all of the "Classics" molds used in previous conventions, Fun Publications had to use either Energon or Cybertron molds for pretty much every figure released at BotCon 2009. So, yet again, I have to mention that this mold comes with a "Cyber Key." Rather than causing a weapon to flip out, Scourge's "Cyber Key" causes an array of blades to pop out of Scourge's arm shield (the top of Scourge's vehicle mode, as seen here). Sadly, the faction changing gimmick created for Sideways (and used to nice effect on Ratbat) is eliminated entirely here. But there really wouldn't have been an appropriate way to use it, anyway.

In robot mode, we see that Scourge was given a remolded head appropriate to the character. It's a little small for Scourge's body, but it does capture the essence of the character quite nicely.

I wish that Scourge's character was featured more fully in the "Wings of Honor" comic. Not only does Scourge not feature in the flashback (which is appropriate, since Scourge is generally established as having been created by Unicron in the year 2005), he doesn't really do anything significant in the framing story besides having a weapon blow up in his face. Really, they could have given that job to anyone! Still, it gets us a pretty nice toy.

Actually, it got us several nice toys, at least for those lucky enough to pick up the Sweeps 3-pack. I was allowed to purchase a set when I went through the Thursday night line, but that set was already promised to someone else, and they sold out before I could get to the club store after limits were lifted on Saturday morning, so you'll just have to make do with this picture taken at the convention. The Sweeps use the exact same mold as Scourge, but unlike the original Generation One Sweeps, which were identical in all respects (save, perhaps, sentience) these Sweeps are given a lighter blue color scheme, with transparent yellow plastic where Scourge had red. It really works quite nicely. These are the hardest-to-find figures of BotCon 2009, at only 1000 sets, and eBay auctions have them selling at a fairly high price. If you're able to find one (assuming you find a seller who's actually selling them singly, rather than bundled as a 3-pack, which is surprisingly uncommon) for a decent price, I recommend grabbing it.